I-Basic, analog room thermostat

I-Basic is the analog room thermostat with microprocessor with which it is possible to manage all the hydronic terminals produced by Aerfor, which guarantees maximum functionality and low costs.

All the models in this series of non-digital room thermostats are available in both slim and wall-mounted versions and are extremely easy to use and install.

Each one is distinguished from the others: I-Basic0 is the simplest control, which only allows the selection of the fan speed; I-Basic1 is the solution that allows the management of the ACHPS system in fan coils of the FIPA and FNL series, while the top of the range product is I-Basic3, which is able to manage the fan coil with EC motor, guaranteeing maximum energy savings.

slim version
wall version

Main components

I-Basic0
It is the basic model of the series, which allows the unit to be switched on / off and which provides three fan speeds and the minimum thermostat as an option. It is installed on 2 and 4 pipe systems, with 230V-50Hz ON-OFF valves and modulating valves with 0 / 10VDC signal.
I-Basic1
In addition to the functions provided by I-Basic0, the I-Basic1 model is the ON / OFF thermostat which, as an additional option, includes the external ambient probe (max 10m, shielded cable and away from the power wires) and the minimum thermostat (code TM , the fan starts if and only if there is hot water in the battery).
I-Basic3
In addition to the functions provided by I-Basic1, I-Basic3 includes a microprocessor that can be set via dip switch, automatic speed, modulating valves with 0 / 10VDC signal and three-point valves and 230V-50Hz, 0-10VDC output. for EC brushless type motor (low electrical absorption and low noise). It also offers the possibility of using it in combination with an electric heater (2-pipe systems only) as an integration or as a replacement. Optional: external ambient probe (max 10m, shielded cable and distant from the power wires).